This is Mr. Ravi Patil He is the operator of the lathe, the operator of the lathe machine and has come from Nashik-Ambad. This is the reason for testing the machine above our floor Which of the first machines in Rajkot were con puli type When she met him, he had a lot of trouble and today he wants to buy a machine that is not difficult for years.
In this video, I will also tell you how this operator tests the machine, examines the machine.
What is that customer review after seeing this Banka 43 model machine?
After the purchase of the machine, the operator wants the purchase from the machine and the parts required by the machine and the safety of those parts during the maintenance and maintenance of the machine. This ensures an operator. This was Mr. Patil's first question, what parts do we need, how would you send the parts to us and are your parts interchangeable on this lathe machine. An operator can change this easily. This was his big question.
When Banka showed his manual book and he showed many parts, he said that after watching the manual book explore the scene, I have not seen such a manual book to date. And look at the assembly of the car or bike inside their manual book, it also has such an exploded view. But no such manual book was seen inside the machine. He said that the con puli lathe machine which is today is running in 3 pieces. Every day is a problem and during maintenance, manufacturers do not sport it nor do they get parts. Since this time, his company is getting all upset. And whatever gear machine they are getting from Banka. She is the first to buy all the gear machine lathe machines of her company.
One of the operators also said that his company has given this machine specifications of all gear lathe machines of Banka. Therefore, the results of this machine are good
Responsibility has to be made. Working with this machine was an operator's job and Mr. Patil wanted to come to Rajkot to run the machine. My suggestion to anyone who wants to buy a new lathe machine is to watch all the videos on Banka's YouTube channel. Before purchasing the machine sent to the operator in Rajkot.
It is hard work for 2-3 days. If the operator tests the machine, test it, but if it buys, it takes a test drive, then it will be able to work well on it. All their functions are understood.
So those people will have no problem.
Patil is very happy to see our 43 model tailstock.
Tell our operator that if this heat type spindle has a good nose, if you call it good, only one operator can open it by hand and replace it with another chuck. When our operator succeeded it, he was very satisfied with these machines.
Thanks a lot.
1) How to trial a Lathe machine?
लेथ मशीन का ट्रायल कैसे लेना चाहिए?
2) How does the service engineer of the Banka machine re-install the machine?
बांका मशीन का सर्विस इंजीनियर मशीन को कैसे री -इनस्टॉल करता है?
3) How to check the performance of the lathe machine?
लेथ मशीन के प्रदर्शन की जांच कैसे करें?
4) How do customers take a trial over a lathe machine?
लेथ मशीन के ऊपर ट्रायल कैसे लेते है कस्टमर?
5) How does the Banka machine reach the Nashik lathe machine from Rajkot?
बांका मशीन राजकोट से नासिक लेथ मशीन कैसे पहुंचता है?
6) What does Banka's service engineer think about the machine after going there?
बांका का सर्विस इंजीनियर वहां जाकर क्या क्या समजता है मशीन के बारे में?
7)Banka's service engineer tells you what should you care about the machine?
बांका का सर्विस इंजीनियर आपको मशीन के बारे में क्या ध्यान रखना चाहिए वो कियु बताता है?
Machinery requires to visit our website:-
Special price to call Mr. Taufiq:- +91-9377093780
Whatsapp:-
Facebook:-
Visit Our Youtube Channel:
Our Photos Album:-
0 Comments